For the past 2 months we have been packing up
the layout. We are projected to move in December to our new house in Colonie, about 4 miles from my current house. The layout was disassembled into 16
modules. We will be reassembling the layout during the winter.
Mark Oliviere
10/22/2017
Ken Karlewicz, You Tube Update
Here is the link for My first
YouTube video.
Let
me know what you think...
Ken Karlewicz
New Paint!
Tonight finds me parked
alongside the Pan Am Railways main line at East Kingston, NH, having driven
down from Hinesburg under the pretense of catching the Pan Am Office Car
Special (OCS) returning eastbound to Portland overnight after spending the
weekend at the Glory Days railfan event in White River Jct. In theory, a great
idea! In reality, while the OCS rarely runs at night, my back up plan was to
shoot the New Hampshire Northcoast (NHN) gravel train, dependably returning
around 04:00 from Boston. There also was a good chance the Pan Am
freights EDPO and SEPO would be seen, powered by the newly acquired ex-CSX
C40-8s. For a nice change, I was not dealing with a single train.
The drive down from
Hinesburg consumes close to three and a half hours. At this time of night
though, it is a breeze, mostly interstate with little traffic. The drive
went well until..........I was closing in on the last turn, from rte. 125 onto
rte. 107. It’s eleven thirty and as I am looking for the sign for 107 I come
upon on of those temporary led road signs warning of planned activities. This
one read...........NIGHTTIME PAVING DETOUR AHEAD. Coming upon the paving,
I was (predictably) detoured around the stretch of road
that contained the turn for 107. I realized this after I had driven south
a few miles. I then backtracked and asked some paving company folks how to get
to 107 and East Kingston from here and they helped me out. A twenty to thirty
min. delay.Arriving at East Kingston the eastbound signal is green already! I was hoping this was not the OCS and was relieved to see EDPO come by. Now I could set up the lights and cut back the new growth sumac again, lol! I was last here in April, and was impressed at the reclaiming of ground the sumac had made! By midnight twenty three I was taking my first test shot. The next eastbound train would not show up until 04:39! By then it was obvious the OCS was not going to appear. It was the timeframe for the NHN gravel train making its return trip from Boston. I kept busy tweaking the lights, then listening to Coast To Coast AM while staring at the eastbound signal. Trying to “will it” to turn green. That didn’t work well at all, lol! While in the car I spotted a good size skunk wandering the area, so when I was outside I kept “awake” with an eye open for it.
It was well after 04:30 when the signal lit up green! This must be the gravel train I concluded. Running behind NHN GP 38-2s, this would be a nice catch indeed! I get up atop the stepladder, test the lighting, idling along all this time. and it looks fine. Within a couple minutes the crossing signals directly behind my position activate, the track down below the station lights up reflecting approaching headlights. I fire off an awareness flash for the crew. Now headlights appear, here comes the head end! I watch judging train speed as the lead unit quickly closes in on the station and my mark, I press the shutter release before the leaders pilot plow is by my mark. It turns out to be a good move as in the split second it takes for my eye to hand coordination to function, the front of the lead engine moves ten feet and is past my mark!
But................the reflection! In the instant the lighting reflects back I see the striped yellow and green nose of the newly repainted and rebuilt GP 38-2 3823! 3823 is the only GP 38-2 with the stripes I believe? Then darkness envelopes the scene, in a rush of wailing air horn and locomotives the head end roars past me followed by the empty hoppers. Once the last car is by me, I get down and inspect the image. It looks good! I like the nose! The station is its usual photogenic self. The wait was worth it! It is an honor to shoot trains at night here! See what you think? Shot on September 12, 2017 at 04:39, 1/800 at f3.5. Please enjoy! Comments are welcomed.
All The Best In 2017;
Gary Knapp
New additions for the paper train pool....
While some new home road cars are greatly
needed, these recently weathered
CN and CV paper cars were just placed into service and were photographed on
southbound Train RW6 (the paper train) as they posed during an early morning
cloudburst at Cobleskill N.Y.
They had been sitting on a shelf in boxes in the basement for the past
year and it was time to get back on something besides scenery.
I just bought a new, (used) camera, and the Sony X100 has the ability to
choose film effects while shooting.
The first I believe is Fugi Provia and the bottom one is a color print
film effect.
I still have to do some weathering on the rooftops but got excited to use
and test the camera.
I like the color range in the Pro via one better myself.
Hope you guys are having a great day...
Ken Karlewicz
CN and CV paper cars were just placed into service and were photographed on
southbound Train RW6 (the paper train) as they posed during an early morning
cloudburst at Cobleskill N.Y.
They had been sitting on a shelf in boxes in the basement for the past
year and it was time to get back on something besides scenery.
I just bought a new, (used) camera, and the Sony X100 has the ability to
choose film effects while shooting.
The first I believe is Fugi Provia and the bottom one is a color print
film effect.
I still have to do some weathering on the rooftops but got excited to use
and test the camera.
I like the color range in the Pro via one better myself.
Hope you guys are having a great day...
Ken Karlewicz
Ken Karlewicz's July Op Session Update
This past Sunday was exactly 10 days short of
the one year anniversary of the layout's construction and also the second
official Operating session here the A&S. I had busted my "u no what", to get a bunch of scenery and
backdrops done so as to create a better feeling for the guys who had come to
see the layout for the first time.
Last Night in Maine!
My last night in Maine.
Tomorrow, Sunday, I drive Mom and myself back home to Vermont in the bright
hours............eeeek! I sacrificed the seafood dinner for a Subway
Veggie-Delite salad with egg, in the interests of arriving in Livermore Falls,
easily a two hour drive, before RUPO did. Once I arrived in
Livermore Falls, I waited to hear some indication from the District One
dispatcher of RUPO as the previous night I had heard them starting out of
Rumford in the wee hours, most unusual. Instead, after an hour and a half,
having heard nothing, I feared the worst, that the job was not in the area, and
headed southeast to Winthrop, figuring I could double back in the event the job
showed some sign of life and if not, I could still count of WAPO being around
overnight. Thirty min. later I am in Winthrop, park and shut off the car to
listen...........both to the scanner and for WAPO on the line that goes through
town, after twenty min. of uncomfortable silence I get the idea to go to
Monmouth. Maybe a twenty min. drive.
Arriving in town from
the north rather than the south, I drift down the hill to the rte. 132 crossing
and turn to swing in and park at my familiar spot. Bright red reflects
back from my headlights! Another car is parked in my spot! A man is inside
staring back at me! What the heck!? You gotta be kidding me I thought. I drove
down past the freight house, turned around and come back up and park behind the
red car. Having heard nothing on the scanner, I figured to set up anyways
hoping to see WAPO. It’s my last night here for a while, I would like to shoot
a train of course. I pop the hatchback, get
out and change into hiking boots, then start to put together the lighting. The
man jumps out to ask if he is “in the way”. I assure him he is not, and we
converse about our various “missions” tonight. His name is Justin Berard, a
railfan, he is waiting for WAPO as a friend of his, the engineer, is making his
last run on this job before taking a yard switcher job in Waterville! Justin
relates how he normally waits to see WAPO further east in Belgrade, but
tonight, for some reason, he decided to go to Monmouth with his grandson
accompanying him! We chat while I set up a couple lights. He asks about the lighting and what I am up to over here from Hinesburg, Vermont. Then Justin mentions how “they are already by Belgrade”. I walk a little quicker now, LOL! Knowing it will not be 02:30 tonight when they go by! Justin is surprised I seem to know where each flash unit needs to be placed, then I mention how I just did this setup last night! LOL! I invite Justin to pose in the photo waving to his friend for me. Please? He agrees to! His grandson is asleep in the car seat, so why not! I’m pumped up! This could be great! And to think I tried to bribe Bonnie & Richard Wingler to come over from Cadyville, NY and pose for me with the promise of a gift certificate to The York River Landing?! (Big smile) Justin shares the lead locomotive, it’s the 611, an SD45 carbody wearing the “Blue Dip” scheme. Perfect! I have not shot the Blue Dip here. Tonights the night!
I finish setting up the lighting, (whew!) and I position Justin in the scene. After a couple test shots and repositioning of flash units, I’m happy. A headlamp goes on the ground behind Justins feet to remind him where he needs to stand and to prevent me from cutting off his feet while hand holding the tiny GR when the 611 comes past us. Just like it was rehearsed, an air horn blows for a crossing in town! WAPO is here! Like previous run-bys here, everything slows down. Minutes seem to pass as WAPO proceeds towards us. Justin practices his “wave” as I do a couple test shots. It is so quiet, the power sounds like it right up around the curve. Now the crossings signals activate, headlights illuminate the cut above the crossing then slowly swing into view, navigating the short tangent section of track then 611s loud air horn blows for the crossing leading WAPO over it! The live view monitor on the GR goes dark as the shutter closes down from the headlights! Justins is down in front of me waving away, I’m atop the stepladder watching my marks. This time I want to wait until the cab is closer to me.
I’ve got Justins feet framed OK as 611s cab looms large coming off the crossing. I find my other mark as it goes out from 611s plow passing in front of it, pause, then press the shutter release. Blue reflects back before darkness returns! I give the engineer a wave as the cab slowly passes me then wait to carefully get down after the last car is past. There’s no waiting to see the photo though, it looks like SUCCESS on the back of the GR! I give Justin a thumbs up! Back down on the ground Justin agrees, he likes the photo too! We share emails before he takes off to follow his friend further southwest towards Portland. I am on cloud nine afterwards! This is a shot I wanted to get before the EMDs disappear with more GEs coming to Pan Am.
I was reminded of the late Dr. Alan Irwin reflecting on tonights adventure. A constant source of encouragement and admiration for my railroad photography, Alan himself a highly skilled photographer, he was always reminding me how “Luck favors the prepared.” This was certainly the case tonight! Special thanks of course to Justin Berard! Shot in Monmouth, Maine on June 24, 2017 at 00:12. 1/800 at f2.8. Please enjoy! Comments are welcomed.
All The Best In 2017;
Gary Knapp
"Old Ties - A Load For A Gondola"
In Chapter 22 I gave you everything you needed to know about
modeling a scrap tie pile.
In this chapter I'll tie (pun unintended) the two ideas together
in modeling a load for a gondola. I again used my wife's (used) Diamond
matches. They come 300 to a box so you get plenty to go the distance
should you choose to make a full load (photo 1). I made a partial load
filling in the remainder of the floor with bric-a-brac and some Monster Model
Works tie plates. The ties only consist of a single layer on top of a
piece of 1/8 tick balsa and some grey cardboard for height (photo 2). I
painted/stained the match stick ties individually with a combination of black,
grey and brown. This is a bit tedious but, (I think) worth the effort for
achieving realism.
A caveat: I don't go to the rather insane level of
explanation the contemporary modeling magazines go in describing my how-to
methods. The "chapters" are meant to be inspirational. If
you chose to follow up on any of my ideas you welcome to approach them in your
own manner.
Cheers,
Wayne Sittner